Consulting history
| 2022 | Consulting via internet: Reheating furnace operation |
| 2022 | Consulting via internet: Head end down problem after F7 |
| 2022 | Consulting via internet: Descaling pattern test |
| 2021 | Consulting via internet: Back up roll spalling under full production |
| 2021 | Consulting via internet:Strip slippage at finisher stands due to circulating water quality |
| 2021 | Consulting via internet: Inclusion |
| 2018 | Surface defects of auto-body cold rolled strip: steel making origin, hot strip mill origin or pickling origin |
| 2017 | Seminar course for "Surface defects due to steel making and hot strip mill, IF steel rolling, Telescope, Lateral movement at rougher and finisher" |
| 2017 | Seminar course for "Technical service training" |
| 2017 | Scale problem in stainless steel |
| 2017 | Cross bow in heavy gauge hard coil, Head end upward cobble problem Considering aspects on introduction of HSS steel FDT problem in light gauge Countermeasure to increase production Several maintenance problems |
| 2016 | New hot strip mill configuration |
| 2015 | Telescope, BUR bushing damage, Coil break, Width Rolled in scale |
| 2013 | Seminar course for "Thickness, Width, Rolled in scale Strip profile and flatness, Telescope, Surface quality 2 Lateral movement at rougher and finisher, camber, Roll cross and thrust force, FDTcontrol ,CTcontrol, How to increase production, How to increase yield" |
| 2013 | Rolled in scale |
| 2013 | Inclusion |
| 2013 | Pincher problem |
| 2013 | Low temperature rolling in high carbon steel |
| 2013 | How to reduce hardness in high carbon steel as hot rolled |
| 2012 | Seminar for "Rolled in scale" and "Strip profile and flatness" |
| 2012 | Damage to back up roll chock bearings |
| 2011 | Edge crack |
| 2011 | Rolled in scale in low alloy high carbon steel |
| 2009 | Hot rolling condition of API Grade |
| 2008 | Edge scab |
| 2008 | Meandering problem at a new processing line |
| 2007 | Consulting for one year |